1 5 10 20 50 70 100 micron 10 inch PP Melt Blown Sediment Water
Filter Cartridge
Product Description
Melt-blown filter cartridge with external sparse and no inner dense
sparse sesign,has stable high flow, high pressure and long lifespan
peculiarities.As the chemical composition of PP clean and meet the
standards of food hygiene, it will not be filtered secondary
pollution, with high flow, high precision, corrosion resistance,
high-pressure resistance, widely used in printed circuit boards, RO
infiltration, Plating, pure water, food and drinking water
prefiltratioMelt-blown filter cartridge with external sparse and no
inner dense sparse sesign,has stable high flow, high pressure and
long lifespan peculiarities.As the chemical composition of PP clean
and meet the standards of food hygiene, it will not be filtered
secondary pollution, with high flow, high precision, corrosion
resistance, high-pressure resistance, widely used in printed
circuit boards, RO infiltration, Plating, pure water, food and
drinking water prefiltratio.
Features
1. 100% high purity polypropylene (melt blown), no adhesives
2. High dirt holding capacity and low pressure loss
3. Many connections(DOE, 226, 222 End caps)are available
4. Wide chemical compatibility, various micron ratings(1um to
100um)
5. One piece construction, up to 1524mm(60”)
APPLICATION
1. Pre-filtration in process water treatment industry
2. Clarification for waste water treatment
3. Bottled water, wine, beer pre-filtration in food and beverage
industry
4. Pre-filtration before RO system in electronics process water
5. Organic solvents, inks, plating solution, metal cutting, fluids,
photoresist filtration
Specification
Construction Materials
| Filter Media | Melt Blown Polypropylene |
Inner core | PP or core less |
Seal Method | Thermal Bonding, No Adhesives |
O-rings/ Gaskets(only for 222,226,DOE) | Silicone/Nitrile/EPDM/Viton/Teflon |
Technical Data
| Micron Rating | 1.0, 5.0, 10, 20, 50, 70, 100um |
Normal Operating Temperature | <50℃ (122 oF) |
Max. Operating Temperature | <80℃ (176 oF) |
Normal flow direction pressure | 4.0 bar(58 psi) |
Reverse flow direction pressure | 2.0 bar(29pci) |
Filtration efficiency | ≥ 80% |
Sterilization | Not recommended |
Cartridge Size
| Outer Diameter | Φ 63(2.5'')/114(4.5) mm |
Inner Diameter | Φ 28mm (1.10") |
Filtration area(m2) | 0.4 /10'' |
Length(based on DOE end cap) | 10’’, 20’’, 30’’, 40’’, 50'', 60'' |
pH | 1-13 |
Ordering Information
Construction Materials
| Filter Media | Melt Blown Polypropylene | Construction Materials
| Filter Media | Melt Blown Polypropylene |
Inner core | PP or core less | Inner core | PP or core less |
Seal Method | Thermal Bonding, No Adhesives | Seal Method | Thermal Bonding, No Adhesives |
